Home > Search by Vehicle > Acura > TSX > 04-08
Sort By:
Page of 1
P2R Upper Radiator Polyurethane Bushing K&N Honda Oil Filter 06-08 Acura TSX Thermal Throttle Body Gasket
K&N Honda Oil Filter
Our Price: $11.99

P2R Polyurethane Upper Radiator is made from Polyurethane 90a durometer. Comes in the color red and fits just about every Honda & Acura application from 1990 to 2020.

MSRP: $5.79

Part#: PB005

Fits:

1990 – 2020 Honda Accord
1992 – 2020 Honda Civic
1992 – 2001 Honda Prelude
1995 – 2020 Honda Odyssey
2000 – 2009 Honda S2000
2006 – 2020 Honda Ridgeline
1997 – 2020 Honda CR-V
2017 – 2020 Honda Clarity
2007 – 2020 Honda Fit
2003 – 2011 Honda Element
2000 – 2020 Honda Insight
2003 – 2020 Honda Pilot
2016 – 2020 Honda HR-V

1990 – 2001 Acura Integra
2002 – 2006 Acura RSX
1991 – 2005 Acura NSX
2017 – 2020 Acura NSX
1991 – 1995 Acura Legend
1992 – 1994 Acura Vigor
1995 – 2014 Acura TL
1997 – 2003 Acura CL
2015 – 2020 Acura TLX
1996 – 2013 Acura RL
2014 – 2020 Acura RLX
2001- 2020 Acura MDX
2007 – 2020 Acura RDX
2013 – 2020 Acura ILX
2004 – 2014 Acura TSX
2010 – 2013 Acura ZDX

P2R Power Rev Racing throttle body gaskets will help reduce intake air temps by removing the direct connection of the throttle body to the intake manifold. By placing this thermal gasket between the throttle body and the intake manifold, you will help reduce the amount of heat soak the intake manifold normally absorbs.
04-05 Acura TSX Thermal Throttle Body Gasket 04-08 Acura TSX Thermal Intake Manifold Gasket K Series Exhaust Manifold Gasket
P2R Power Rev Racing throttle body gaskets will help reduce intake air temps by removing the direct connection of the throttle body to the intake manifold. By placing this thermal gasket between the throttle body and the intake manifold, you will help reduce the amount of heat soak the intake manifold normally absorbs. P2R Power Rev intake gaskets will help reduce intake air temps by removing the direct connection of the intake manifold to the cylinder head. By placing this thermal gasket in between the intake manifold and the cylinder head. You will help reduce the amount of head soak the intake manifold normally absorbs from the cylinder head.

P2R exhaust gaskets 1.6mm thick and are made out of a
flexible solid graphite material that can withstand extreme temperatures.
These gaskets seal so well that they can even help you seal on manifolds with
warped flanges.  As always our gaskets are built right here in the USA
using high quality standards.

Steel Braided Clutch Line Billet Radiator Stay Bracket with Polyurethane Bushing Honda CRV K24A Bracket
Steel Braided Clutch Line
Our Price: $44.99
Honda CRV K24A Bracket
Our Price: $74.99
02-06 Acura RSX
06+ Civic
08+ Accord
P2R Power Rev Racing Stainless Steel clutch hose is made from Teflon lined stainless steel braided hose with a black protective covering. P2R clutch hose replaces the factory rubber section and will give you a better, more firm feel on the pedal, as well as better clutch performance.

09-10 Acura TSX
08+ Accord V6
04-08 Acura TSX
03-07 Accord V6
04-08 Acura TL  
2011 Honda CRZ
1999-2000 Honda Civic SI
Sold as a pair. P2R billet radiator stay bracket is made from 6061 aluminum. 90A durometer polyurethane bushings.

Fits:
98-02 Accord V6
03-07 Accord 4 Cylinder
99-03 Acura TL
01-03 Acura CL
04-08 Acura TL
04-08 Acura TSX
Doing a K24A swap? No need to go to Honda to get this bracket anymore. P2R now offers you a better solution. This bracket weights in at only 310 grams, while the Honda bracket weights in at 805 grams. P2R bracket is made from 6061 aluminum and then anodized clear or black for added strength. Compare to Honda Part# 11910-PPA-000.
P2R RBC Intake Manifold Titanium Bolt Kit Acura ZDX J37 throttle body
P2R Titanium Exhaust Manifold Stud Kit offers a roughly 45%
weight reduction over the stock steel counterparts. Allen Hex key tip allows for easy
installation. Includes 8 studs ,8 washers,
and 8 nuts.
The Acura ZDX & MDX J37 Throttle body. This very reliable OEM Honda part is very similar to the Acura TL-S throttle body with less out of your wallet. 78mm ID opening tapered down to 70mm. This DBW throttle body will bolt to a RBC manifold or other DBW flanged Honda intake manifold (AP2 S2000 etc.) using our P389 or P384 P2R adapter.