|
|
|
|
|
|
|
|
|
|
|
P2R Polyurethane Upper Radiator is made from Polyurethane
90a durometer. Comes in the color red and fits just about every Honda
& Acura application from 1990 to 2020.
MSRP: $5.79
Part#: PB005
Fits:
1990 – 2020 Honda Accord 1992 – 2020 Honda Civic 1992 – 2001 Honda Prelude 1995 – 2020 Honda Odyssey 2000 – 2009 Honda S2000 2006 – 2020 Honda Ridgeline 1997 – 2020 Honda CR-V 2017 – 2020 Honda Clarity 2007 – 2020 Honda Fit 2003 – 2011 Honda Element 2000 – 2020 Honda Insight 2003 – 2020 Honda Pilot 2016 – 2020 Honda HR-V
1990 – 2001 Acura Integra 2002 – 2006 Acura RSX 1991 – 2005 Acura NSX 2017 – 2020 Acura NSX 1991 – 1995 Acura Legend 1992 – 1994 Acura Vigor 1995 – 2014 Acura TL 1997 – 2003 Acura CL 2015 – 2020 Acura TLX 1996 – 2013 Acura RL 2014 – 2020 Acura RLX 2001- 2020 Acura MDX 2007 – 2020 Acura RDX 2013 – 2020 Acura ILX 2004 – 2014 Acura TSX 2010 – 2013 Acura ZDX
|
|
P2R Power Rev Racing throttle body gaskets will help reduce intake air temps by removing the direct connection of the throttle body to the intake manifold. By placing this thermal gasket between the throttle body and the intake manifold, you will help reduce the amount of heat soak the intake manifold normally absorbs.
V6 Model Only
|
|
|
|
|
|
|
|
|
|
|
|
|
EGR block off plate for almost any Honda engine with EGR. Includes stainless allen head bolts, and gasket.
|
J Series Oil-pump Crankshaft Oil Seal Install Tool.
This tool allows you to easily and properly install the Pulley side crankshaft oil seal on the Honda/Acura J series engine.
|
This tool allows you to easily and properly install the camshaft seal on the Honda/Acura J series engine.
|
|
|
|
|
|
|
|
|
|
|
|
|
OE Replacement Timing belt for all J series engines newer than 2004.
|
P2R exhaust gaskets 1.6mm thick and are made out of a flexible solid graphite material that can withstand extreme temperatures. These gaskets seal so well that they can even help you seal on manifolds with warped flanges. As always our gaskets are built right here in the USA using high quality standards.
|
This bracket will help make your engine bay look cleaner by removing the Factory Engine Hanger Plate. This aluminum piece is raw machine finished and is not anodized. Comes with stainless steel allen bolts.
Vehicle Fitment:2004-2008 Acura
TL
2009-2014 Acura TL
2005-2012 Acura RL
2003-2013 Acura MDX
2013-2015 Acura RDX
2010-2014 Acura TSX V6
2010-2013 Acura ZDX
|
|
|
|
|
|
|
|
|
|
|
|
|
P2R Power Rev intake gaskets will help reduce intake air temps by removing the direct connection of the intake manifold to the cylinder head. By placing this thermal gasket in between the intake manifold and the cylinder head. You will help reduce the amount of head soak the intake manifold normally absorbs from the cylinder head.
K24 Model
|
P2R Power Rev intake gaskets will help reduce intake air temps by removing the direct connection of the intake manifold to the cylinder head. By placing this thermal gasket in between the intake manifold and the cylinder head. You will help reduce the amount of head soak the intake manifold normally absorbs from the cylinder head.
Only fits V6 model
|
P2R Billet Cam Cap Seal is made from 6061 aluminum. Includes stainless Allen head bolts, and new OEM Honda O-Ring. Available in a wide array of colors.
Fits Front Head Only.
|
|
|
|
|
|
|
|
|
|
|
|
|
This tool allows you to easily and properly install the Rear Main seal on the Honda/Acura J series engine.
Handle is needed for this tool. Part#: TP0003
|
P2R J-series intake block off plate provides a simple storage solution for spare or built J series engines. No more ugly rags or plastic caps stuck in the ports to try and keep dirt and junk out. 60601 aluminum plates are black anodized and laser etched. Includes Stainless Steel Allen head bolts.
Sold as single unit for 1 cylinder head.
|
02-06 Acura RSX 06+ Civic 08+ Accord P2R Power Rev Racing Stainless Steel clutch hose is made from Teflon lined stainless steel braided hose with a black protective covering. P2R clutch hose replaces the factory rubber section and will give you a better, more firm feel on the pedal, as well as better clutch performance.
09-10 Acura TSX 08+ Accord V6 04-08 Acura TSX 03-07 Accord V6 04-08 Acura TL 2011 Honda CRZ 1999-2000 Honda Civic SI
|
|
|
|
|
|
|
|
|
|
|
|
|
P2R J Series Rear Head Water Pipe Flange is threaded with -16an.
|
P2R silicone radiator hoses are made of high quality 4-ply reinforced silicone. They are very strong and resist heat better than standard rubber hoses. Our hoses are offered in 2 color choices of either Red or Black.
Automatic Engine Only
|
P2R Manual Timing Belt Tensioner will fit all J series applications. It's made from 6061 aluminum, and its designed to be reusable. You can easily adjust your timing belt tension by turning the 12.9 Alloy Steel Allen head bolt.
|
|
|
|
|
|
|
|
|
|
|
|
|
Increase horsepower and torque with this 3/4 inch throttle body spacer. Tests on a 06 Accord V6 produced a 4.5 horsepower gain at the wheels! Our spacer comes equipped with a 1/8th inch NPT threaded port at the bottom that can be used as an extra vacuum port or nitrous. Includes thermal gaskets, extended stainless steel Allen bolts, plug, and is anodized for a brilliant show-quality look.
|
Complete set of 24 valve locks (48 pcs) for J series engines.
Degree: 7º Diameter: 5.5mm
|
Titanium bolts for J series engine timing cover. Includes 17 titanium bolts.
|
|
|
|
|
|
|
|
|
|
|
|
|
Ferrea Bronze Valve Guides for Honda V6 J Series Engine. Complete set of 24 pcs.
|
This kit will make P2R P218 Billet Fuel Rails a plug & play install for the following vehicles: 04-14 Acura TL (3.2, 3.5, and 3.7 models) 03-17 Honda Accord V6
This kit is made using Fragolas Premier RaceRite Pro Hose, which features an enlarged inner diameter with a conducive smooth bore P.T.F.E core that utilizes a convoluted exterior and black Aramid braid cover. Making it compatible E85 and other fuels.
|
Complete set of 12 intake valves for Honda / Acura J series engines.
Head Diam: 36.00mm Item Diam: 5.48mm Length: 116.90mm Material: Black Nitrided Valve Type: Intake
|
|
|
|
|
|
|
|
|
|
|
|
|
Complete set of 12 exhaust valves for Honda / Acura J series engines.
Head Diam: 30.00mm Stem Diam: 5.45mm Length: 114.20 Material: Inconel Valve Type: Exhaust
|
Complete set of 6 I-Beam Connecting Rods with real ARP2000 3/8 rod bolts. Made from 4340 Chrome-Moly.
|
Ferrea Valve Spring Kit for the J series engine is exclusively available through P2R and includes a complete set of Valve Springs, Titanium Retainers, Valve Locks, and Seat Locators.
Spring Info: 95 lbs @ 42.3mm 190 lbs @ 32.3mm Coil Bind @ 30mm
Mass: 31.4g
|
|
|
|
|
|
|
|
|
P2R CNC Ported Cylinder heads come sold as a pair.
Includes: Jet Wash Cleaning Removal of OEM Guides CNC porting of intake and exhaust ports CNC of the combustion chamber
Core Charge: If you do not provide us with your cylinder heads. We can provide them for $400.
Spring & Retainer Kits: Spring & Retainer Kits are complete with Valve Springs, Retainers, Spring Seats, & Valve Locks.
Valve Guides: Ferrea Bronze Valve Guides with installation. Bull nose taper added to improve airflow.
Intake Valve Seats: Intake valve seats is required for 37mm valves. Not required for 36mm valves however does provide a base for a better competition valve job.
Exhaust Valve Seats: Exhaust valve seats is required for 31mm valves. Not required for 30mm valves.
Assemble: Valve Guides & Competition Valve job must be added in order to get the heads assembled. Assembly includes Debur, glass bead, final wash. Set Valve drops and spring heights. Assemble complete from Locks to Valves. Also includes cylinder head resurfacing.
|
|